| Author |
Message |
|
warey
|
Post subject: need help  Posted: Wed Jul 21, 2010 11:14 pm |
|
| New Member |
 |
Joined: Wed Apr 14, 2010 8:33 pm
Posts: 13
|
Hello guys I need help with the eclipse.now it started life as a ax10 artr.the orange one.Now it has an eclipse chassis.3 racing alloy trans mount.Gear box has 3 racing cases,robinson racing output and idler gear and stock drive gear and shaft.no dig and MIPs. Diffs are 3 racing alloy housing,heavy duty bevel gears.hot racing axles and adapters for the rears and hot racing c hubs with axial hubs and 3 racing cv axles up front.Wheels are rc4wd bead locks with proline chisels. Suspension has 3 racing bent links and shocks with droop set up. Motor is a 45 turn phantom with a novak rooster esc. Servo is a blue bird bms-660mg.carbon fibre front battery/servo mount. batterys are 1.3 lipos. now it's not stock anymore  can you guys help me out pls.I dont know what class to run it in.we use your rules here in the west.heres a pic if that helps. 
|
|
| Top |
|
 |
|
Hulksta
|
Post subject: Re: need help Posted: Wed Jul 21, 2010 11:21 pm |
|
| Contributing Member |
 |
 |
Joined: Thu Dec 24, 2009 8:21 am
Posts: 249
Location: Newcastle NSW
|
Looks like a pro rig to me.. 
|
|
| Top |
|
|
|
Hulksta
|
Post subject: Re: need help Posted: Wed Jul 21, 2010 11:25 pm |
|
| Contributing Member |
|
|
Joined: Thu Dec 24, 2009 8:21 am
Posts: 249
Location: Newcastle NSW
|
Link.... viewtopic.php?f=6&t=2Quote: 3. 2.2 Pro Class:
3.1 Vehicle wheelbase is limited to a maximum of 317mm at ride height.
3.2 Vehicle is limited to 2.2 inch wheels/rims or smaller at the bead surface. Tires may be modified from other sized tires using only a pliable rubber but must not exceed a total uncompressed outer diameter of 152mm.
3.3 Vehicles are limited to 2-wheel steering only. However, rear steering is catered for at this point with the incursion of a Rear Steer penalty as defined in Rule 1.3. Quote: 1.4 Bodiless vehicles:
•1.4.1 Must be a self-supporting, structurally complete, rigid frame.
•1.4.2 2.2 Class Overall bodiless dimensions must be 203mm long, 76mm wide and 95mm tall.
•1.4.3 Super Class Overall bodiless dimensions must be 305mm long, 76mm wide and 95mm tall.
•1.4.4 The roof must be raised a minimum of 25mm from the main chassis to resemble a cockpit.
•1.4.5 The frame sides must be an overall minimum of 25mm tall.
•1.4.6 Bodiless vehicles should resemble a 1:1 vehicle.
•1.4.7 Bodiless vehicles must have solid bonnet panel, solid roof panel and a minimum of 2 solid side-panels.
|
|
| Top |
|
|
|
Badmuthatrucker
|
Post subject: Re: need help Posted: Wed Jul 21, 2010 11:45 pm |
|
| Staff |
 |
 |
Joined: Tue Nov 17, 2009 10:21 pm
Posts: 935
Location: Hills District, Sydney, NSW
|
|
Yeah, Pro. Bodyless is not permitted in Sportsman.
_________________
The empty cANZ rattles the most
Go Hard Hobbies
Linc wrote: To finish first, you must first finish"
"To finish first, first you must be Finnish"
|
|
| Top |
|
|
|
warey
|
Post subject: Re: need help Posted: Wed Jul 21, 2010 11:50 pm |
|
| New Member |
|
Joined: Wed Apr 14, 2010 8:33 pm
Posts: 13
|
Ok the body dimentions are 223mm long.85mm wide.97 high.it has a roof bonnet and side panels all the right size. Is it the tube chassis that makes it pro class or everything that has been modified?  this is were i am getting confused.I dont have a dig or four wheel steering.This is the part of the rules I dont understand.ME STRONG LIKE OX SMART LIKE TRACTOR.
|
|
| Top |
|
|
|
warey
|
Post subject: Re: need help Posted: Wed Jul 21, 2010 11:52 pm |
|
| New Member |
|
Joined: Wed Apr 14, 2010 8:33 pm
Posts: 13
|
|
thanks mate that clears that at last
|
|
| Top |
|
|
|
Linc
|
Post subject: Re: need help Posted: Thu Jul 22, 2010 7:38 am |
|
| Staff |
|
 |
Joined: Tue Nov 17, 2009 9:16 am
Posts: 1118
Location: Hypothermia
|
|
Only three things will really occlude a vehicle from Sportsman: BTA steering, bodiless chassis and/or MOA.
|
|
| Top |
|
|
|
Clarky
|
Post subject: Re: need help Posted: Thu Jul 22, 2010 4:24 pm |
|
| Staff |
|
 |
Joined: Mon Nov 16, 2009 7:03 pm
Posts: 611
|
|
2. 2.2 Sportsman Class:
2.1 Vehicle wheelbase is limited to a maximum of 317mm at ride height.
2.2 Vehicle is limited to 2.2 inch wheels/rims or smaller at the bead surface. Tires may be modified from other sized tires using only a pliable rubber but must not exceed a total uncompressed outer diameter of 152mm.
2.3 Steering linkages are to be in front of the forward axle only. This includes the servo horn, steering links and steering knuckles. BTA (Behind the axle) and OTA (over the axle) steering configurations are not allowed.
2.4 Any combination of Radio and onboard electronics may be used; however, the only control the Driver is to have over the vehicle is for throttle and steering. You cannot control any other functions, either mechanically or electronically.
2.5 Bodied vehicles only are allowed, additionally, chassis must be TVP (twin vertical plate) types only.
2.6 Vehicles must be shaft driven only and powered by a single motor, no MOA (motor on axle) axles are allowed.
_________________
I'm crawling after I've been on the cANZ
|
|
| Top |
|
|
|
highlucks
|
Post subject: Re: need help Posted: Thu Jul 22, 2010 4:57 pm |
|
| Supporting Member |
 |
 |
Joined: Wed Feb 10, 2010 5:59 pm
Posts: 102
|
|
Looks like you need to get a dig Ian. PM sent
_________________
- : : VP - Mayhem - DNA - HH - CKRC - Futaba - CC : : -
Four pack of Jacks thanks mate..... cANZ please.
|
|
| Top |
|
|
